I was originally planning to drive my 12V RGB LED strips (5m + 1m) from an Arduino Uno. It's not an addressable strip so I'll use a mosfet per channel. Since I am now looking to connect it to my Domoticz, I want to drive it from a NodeMCU (ESP8266) which only has 3.3V on the GPIOs. Will this influence the brightness of my strip?
I've got some IRLZ44N N-channel mosfets laying around that should work with the 3.3V GPIOs (Vgs(th) = 2V, if I recall correctly.)
EDIT: forgot to mention that I'll be drawing about 2.5A per channel (i.e. 2.5A per MOSFET) for the complete 6 meters.