0
\$\begingroup\$

I am working on a academic project which requires TP4056 along with battery protection circuit (DW01A).

The ciruit uses a 1S LiPo 500mAh battery.

I want to keep the Overdischarge Protection Voltage (VODP) to 3.2v. Looking at the datasheet of DW01A-G, it mentions that VODP is typically 2.4v.

https://www.ic-fortune.com/upload/Download/DW01x-DS-17_EN_53550.pdf

Can i increase the VODP by simply increasing the resisor value R2 which is shown in the typical application circuit?

I did search for other posts in SE but didn't find any convincing answers. Please let me know.

\$\endgroup\$
0
\$\begingroup\$

No you cannot change any threshold for this chip designed to maximize battery capacity at the expense of aging rate or cycle life.

VODP threshold has a laser trimmed (variable) resistor inside the chip and is not externally accessible.

| improve this answer | |
\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.