Once I establish a ground plane in Eagle PC, how can I relieve it(remove spots locally) such as under smd caps in a filter circuit to avoid impedance change. Andy-KM4TRT
3
-
\$\begingroup\$ Have you ticked the box for self generation of thermal reliefs? I don't know eagle hence not really an answer. \$\endgroup\$– Andy akaFeb 11, 2018 at 17:10
-
\$\begingroup\$ You can use restrict polygons. \$\endgroup\$– Wesley LeeFeb 11, 2018 at 17:16
-
1\$\begingroup\$ You'll want to draw a cutout polygon. There's a duplicate question on here. Just trying to find it. \$\endgroup\$– Tom CarpenterFeb 11, 2018 at 17:26
Add a comment
|