My stepper motor have 4 wire is VEXTA motor 2 phase 1.8"/Step, DC 1.96V, 2.8A. when i measure the resistance wire 1 & 2 is 0.8 ohms, 3 & 4 is 0.9ohms. Is it the correct way to measure the resistance?
1
-
\$\begingroup\$ Why do you need to measure the resistance? Do you mean how to check the correctness of connection to a driver? \$\endgroup\$– drzymalaMar 28, 2013 at 22:55
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
Yes, that means 1 & 2 is your X0 & X1; 3 & 4 is your Y0 & Y1.
