I have started learning transistors few weeks ago and I hit a roadblock (again). I have been following this tutorial on Sparkfun -https://learn.sparkfun.com/tutorials/transistors
Now I have moved to building an Astable Multivibrator using transistor. But I couldn't figure out the logic on how the transistor switches itself ON and OFF over and over again since as far as I can see both the base of transistors have been biased with 0.6v as soon as the power is turned ON via R2 and R3 resistors.
This will make both the transistor to be in saturation mode and transistor will turn ON. Am pretty confused with this circuit diagram.
1) Can you help me to understand figure out the logic behind this circuit?
2) How one transistor remain in cut off as stated in explanation when both the transistors are biased to 0.6v which is sufficient for a transistor to turn ON?
Any help will be much appreciated, thanks in advance.