1
\$\begingroup\$

I created a PCB which needs to have a solid and precious clock source. For this purpose I used a Dual Inverter with Schmitt trigger (NC7WZ14).

CLKI

Now CLKI seems to generate 66kHz square signals (measured by an oscilloscope at the point of CLKI).

Scope image

Why is this circuit not generating 11.0592MHz for me?

EDIT:

Referenced from: https://www.electronics-tutorials.ws/oscillator/crystal.html, at section "CMOS Crystal Oscillator".

Thanks.

\$\endgroup\$
2
  • \$\begingroup\$ Why R8? Feels like you're mixing Opamp and Schmitt-Trigger circuits \$\endgroup\$ Commented Mar 18, 2018 at 13:36
  • \$\begingroup\$ I found it online. What do you recommend for me to change? \$\endgroup\$
    – Daniel
    Commented Mar 18, 2018 at 13:39

1 Answer 1

7
\$\begingroup\$

The problem is that you are using a Schmitt trigger for your inverter. An oscillator like the one you show in your schematic depends on the inverter acting like a linear amplifier due to the feedback, and this is not possible for a Schmitt trigger inverter.

EDIT:

Take a look at this reference which explains using CMOS gates in oscillators.

\$\endgroup\$
6
  • \$\begingroup\$ You suggest me to change the inverter to a non-schmitt trigger one? \$\endgroup\$
    – Daniel
    Commented Mar 18, 2018 at 13:40
  • 1
    \$\begingroup\$ Yes. Take a look at the reference I added to the answer. \$\endgroup\$
    – crj11
    Commented Mar 18, 2018 at 13:45
  • 1
    \$\begingroup\$ +1 Not only non-ST but it should be an unbuffered type. \$\endgroup\$ Commented Mar 18, 2018 at 14:56
  • \$\begingroup\$ Thank you. Will make an update once I got the new part and tried out. \$\endgroup\$
    – Daniel
    Commented Mar 18, 2018 at 16:00
  • 1
    \$\begingroup\$ I have successfully made an oscillator using standard buffered inverters, but I took advantage of a 'feature' that they had issues with ground bounce. (Part was 74LCX04). \$\endgroup\$ Commented Mar 18, 2018 at 16:20

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.