0
\$\begingroup\$

I was buildiing an amplifier circuit for +ve voltages only. When I used a 9V battery to supply V+ and V- (+ to V+, - to V-), I get a constant 8V at the output of the opamp. The output is not changing with respect to input. The circuit worked fine when I used a +/-12V dual power supply. However the way I understand it, using a single supply is okay as long as I'm not dealing with negative input voltages.

\$\endgroup\$
  • \$\begingroup\$ Choose to have both inputs near V+/2 and expect DC to Vout=V+/2 , you may have to AC couple unless you can define here \$\endgroup\$ – Tony Stewart Sunnyskyguy EE75 Mar 30 '18 at 3:18
  • 1
    \$\begingroup\$ What op amp are you using? \$\endgroup\$ – C_Elegans Mar 30 '18 at 3:21
  • \$\begingroup\$ You mean +/-12V. I tried dividing a 9V battery to make a dual supply, but when I connect it to the opamp, I get different voltages at + and - terminals. \$\endgroup\$ – sixter Mar 30 '18 at 3:21
  • \$\begingroup\$ @C_Elegans LM741 \$\endgroup\$ – sixter Mar 30 '18 at 3:22
  • 3
    \$\begingroup\$ Reasons not to use a 741 \$\endgroup\$ – Andy aka Mar 30 '18 at 7:35
1
\$\begingroup\$

According to page 4 of the LM741 datasheet, the minimum supply voltage is +/- 10V, so powering it with +/-9V isn't guaranteed to work. The LM741 is a very old design, and its characteristics are not as good as modern op amps (that being said, it works fine, but it's not what I'd pick for a new design). I'd recommend getting a more modern op amp, you probably want one with rail to rail inputs and outputs as well as a lower minimum supply voltage. I've narrowed down the listing here, you still will want to make sure whatever you pick can use the supply you're planning to use.

\$\endgroup\$
  • \$\begingroup\$ I see. Thanks for the answer. I do happen to have an NE5534 op amp with me. Can I use it to overcome these problems? \$\endgroup\$ – sixter Mar 30 '18 at 3:46
  • \$\begingroup\$ Read the datasheet. It will tell you the minimum and maximum supply voltage \$\endgroup\$ – C_Elegans Mar 30 '18 at 3:57
  • \$\begingroup\$ @C_Elegans - Also note that he's not using two batteries - just one. So no +/- 9. \$\endgroup\$ – WhatRoughBeast Mar 30 '18 at 8:27
  • \$\begingroup\$ @WhatRoughBeast two 9v batteries will give you +/-9v. \$\endgroup\$ – C_Elegans Mar 30 '18 at 14:06

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.