I need to create a VIA stitching on my design but the option doesn't work:
I select the width of my VIA, the area where I want to place all of them, and the net to be connected.
At the end it displayed:
Unable to add any stitching vias to net GND_3
(GND_3 is the name of my ground plane)
I have 10 layers on my board. No tracks are passing under my area, and no components are placed.
note: It was working when no tracks were routed. So maybe the option has no place for the vias...
Thanks for reading and maybe helping.
EDIT 04.04.18: The placment of the vias stitching is placed on the design but there are no via on it (always the same message "unable to add stitching via"). I have like 20 vias stitching area but with no via. Altium version: 1,0,11 (build 97) Altium NEXUS