5
\$\begingroup\$

Question is similar to Differential pair in altium but different (not a duplicate)

Hi ! When about to ECO the schematic to PCB (Design > Update PCB), errors shows up showing that "net(s) not found in differential pair" for my nets.

Even though, the nets are named properly (same name, only _N and _P changes) and both nets have the DIFFPAIR. Still getting the error.

Example screenshot :

enter image description here

note that _ (underscore) shows as space because lines are above text.

Gives me this :

enter image description here

\$\endgroup\$
3
  • 1
    \$\begingroup\$ Please post an image of your Project Options -> Class Generation window. \$\endgroup\$
    – DerStrom8
    May 14, 2018 at 15:12
  • \$\begingroup\$ Whatever, found the issue. When using Verify, it shows error because the net still hasn't been created. IF you start the ECO, the net gets created and the issue resolves itself. Add an answer if you want \$\endgroup\$
    – defvs Daniel
    May 14, 2018 at 17:09
  • 1
    \$\begingroup\$ If you found the solution I recommend you add the answer and mark it as "accepted" \$\endgroup\$
    – DerStrom8
    May 14, 2018 at 18:51

1 Answer 1

Reset to default
6
\$\begingroup\$

If this happens, it is only a visual issue. The nets aren't found because they still aren't created.

You need to apply and not verify or it will not work.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.