Can anyone please help me identify this component. It's marked R40 515 Z5J Dimensions are roughly 6.5mm x 6.5mm x 3.0mm my verniers have disappeared but it's pretty close.
5
-
2\$\begingroup\$ Asking for help identifying a part is on topic. Asking where to buy one will get your question closed. You can edit the question and remove the part about a link to where to buy a replacement. \$\endgroup\$– JREJun 5, 2018 at 18:56
-
1\$\begingroup\$ +1 for a very good picture \$\endgroup\$– jsotolaJun 5, 2018 at 18:59
-
5\$\begingroup\$ Looks like 0.4µH coil. \$\endgroup\$– ChupacabrasJun 5, 2018 at 19:04
-
2\$\begingroup\$ Component ID questions are not off topic! \$\endgroup\$– Voltage Spike ♦Jun 6, 2018 at 6:11
-
\$\begingroup\$ You could further improve your question by adding exact dimensions, if you own a good caliper. \$\endgroup\$– AriserJun 7, 2018 at 11:05
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
1
If the dimension 10.2x10.2x4.7mm lines up with your component then it may be Ferrocore HCI1050-R40 which is a 0.4uH inductor. There are others in the same series with the same inductance and different size. HCI####-R40.
-
\$\begingroup\$ 6.5mm x 6.5mm x 3.0mm all very rough as can't find my verniers, very appreciated though, please if anyone else can identify it I would be most grateful. \$\endgroup\$– th3jokerJun 8, 2018 at 21:35