Pretty new to LED wiring, so need a little advice, please.
Project includes 16 LEDs in all, 4, different colors with, of course, 4 slightly different requirements: 4 Red, 4 Blue, 4 Green and 4 Yellow, each combined on a separate "leg" of the project and a 12v power supply.
Wiring them ALL in series is problematic for this project......so, my question is asking what is the best wiring method? I've seen posts about wiring legs in series but connecting the legs together in parallel to the power source, but this is still so new to me, I get quickly lost in the calculations.
Related question, when using an online resistor calculator, should the legs of 4 use a resistor that applies just to that single-color-4-LED-leg?
Thanks for your time in advance.
EDIT: Sorry, but those schematic elements are still new to me as well....here;s the best I can offer at the moment. Each of these "legs" are not adjacent, so I would prefer handling them as bundled, either in series or parallel. Thanks]1