I am using stm32f303k8t6 nucleo board and Keil V5 IDE. I want to measure temperature with DS18S20 sensor over one wire interface. I have downloaded the HAL library from https://github.com/nimaltd/ds18b20.
But how do i add these library to my project in Keil. Can some one help.
Please tell let me know what is the proper way to add these files to my project.
I have done the same as above once again and it seems like added the c files to my project successfully. But it couldn't find some other header file related to the library**(#include "gpio.h" , #include "cmsis_os.h")**. Is it the error in the library file or project setup error.?