2
\$\begingroup\$

I am doing partial recap on CRT monitor Sony PVM 20m2e. (monitor was working, but RGB lines at the top of screen which should be hidden were visible and geometry is not top notch)

I desoldered C584 from deflection board, sadly it's broken (0.15K ESR, 21% Vloss, but capacitance is OK). And my parts supplier did not send the part which I ordered. Now I don't have working 2.2uF 160V electrolytic capacitor at hand, but I have working 4.7uF 250V electrolytic at hand, would it cause problems?

enter image description here

enter image description here

\$\endgroup\$
  • 2
    \$\begingroup\$ Oh, a red highlight circle may help. \$\endgroup\$ – Long Pham Aug 25 '18 at 13:46
  • 3
    \$\begingroup\$ This is like a nerd's version of "Where's Wally". C580, C582, C583 and C585 are over near DY's connector on the bottom schematic. I can't find C584. \$\endgroup\$ – Transistor Aug 25 '18 at 14:00
  • \$\begingroup\$ refresh, and sorry for not highlighting before \$\endgroup\$ – qwerty12456 Aug 25 '18 at 14:02
  • \$\begingroup\$ Most probably yes. \$\endgroup\$ – winny Aug 25 '18 at 15:06

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.