0
\$\begingroup\$

I have recently bought a lidar sensor with a peculiar cable type. I cannot identify it, but it has some interesting characteristics. It has a pitch of 1mm, and each pin has at most a 0.5mm width. The cable itself is for UART, but I'm not sure if the connector was made for it.

Here is a close up of the male end. enter image description here

\$\endgroup\$
1
\$\begingroup\$

After a quick search, The cable type appears to be a GH1.25-4P connector enter image description here

\$\endgroup\$
  • \$\begingroup\$ This does not seem to match the connector in your previous picture at all. Not the same type of attachment, not the same pitch, not the same edges... \$\endgroup\$ – jcaron Sep 10 '18 at 23:04
  • \$\begingroup\$ @jcaron I'll double check when i get home \$\endgroup\$ – tuskiomi Sep 10 '18 at 23:08
  • \$\begingroup\$ It does seems to be a JST-GH connector indeed (which has 1.25 mm pitch, not 1 mm), but your picture here does not seem to match that connector. \$\endgroup\$ – jcaron Sep 10 '18 at 23:32

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.