I assembled the scheme suggested by Microchip for the Bluetooth Low Energy BLE model RN4871, pointed out in the schematic of FIGURE 5-4 of the Datasheet (page 26). I've connected a led to Pin 12 (P0_2) and set the BLE as UART transparent, according to User Guide (page 59, topic 4.2 UART TRANSPARENT CONNECTION).
According to the manual, it's necessary to associate the I/O Port with a number that identifies the Service Handle. But, when BLE is as UART Transparent, I can't list the Services and their Handlers by de command "LS".
Question: How do I create a script to make the LED blink when I receive (or send, whatever) data via RX/TX?