I feel silly that I can't find this on Google... what is the thread size on locking 1/8" audio connectors like these? There seems to be a de-facto standard, but I can't find any numbers and it's hard to measure an inside thread with an actual plug sticking through it.

  • \$\begingroup\$ Does the datasheet not say? I've never heard of this type of connector. \$\endgroup\$
    – Hearth
    Dec 1 '18 at 2:33
  • 2
    \$\begingroup\$ I would expect that it matches the thread on the jack -- i.e., the same as the jack's mounting nut. One datasheet I found shows it as M6, 0.5 mm thread pitch. \$\endgroup\$
    – Dave Tweed
    Dec 1 '18 at 2:42

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.