I need to measure all the electrical specifications of the Frequency Synthesizer KSN-2346A+ from Mini Circuits that appears in this datasheet: https://www.minicircuits.com/pdfs/KSN-2346A+.pdf
but the problem is that there's no information about how can I start. For example, in that datasheet an Evaluation Board (TB-567+) is mentioned, but I don't know if I have to use it or not, or why would prefer using it or not. And there's no Application Note or nothing. The evaluation board "datasheet" is just the circuit that it uses, but nothing is specified.
So I would like to know where can I get more information, or if any of you used this circuit or measured something similar or anything. I'm reading about others Frequency Synthesizer but I need to measure the specific characteristics of this one.
This is what I understand from the TB-567+ datasheet:
in CON4 I have to put a signal generator with an output impedance of 50 ohms and a frequency of 15 MHz.
in CON2 I have to put a DC signal of 10V
what do I have to connect in CON1?
I suppose that CON5 can be measured with a Spectrum Analyzer. Is that OK? Or is there any other instrument that is better?
what do I have to connect in CON3?