1
\$\begingroup\$

I'm using nRF52 DK with 14.2.0 SDK. I created a LED blink project for testing and extract its HEX file. I uploaded the program to the nRF52 over USB (J-Link-Keil IDE) and the HEX file over ESP12E (SWD) to compare the register values between the working one (USB) and the non-working one (SWD). There is no difference between them. I could not understand why its not working when I uploaded the code over ESP12E. Isn't it enough to just write the hex file into nrf memory. I did some search on the web but I could not find any solutions working for me. Waiting for your replies. Thanks in advance,

\$\endgroup\$
  • \$\begingroup\$ This seems a little mixed up. The nrf52832 has no USB interface. The j-link would be using SWD. It's not clear what you were doing with the ESP12E. Without full details that make sense, your question is unanswerable, though doing a full erase and loading only your custom program but not the softdevice could be a guess. \$\endgroup\$ – Chris Stratton Jan 11 at 6:59
  • 1
    \$\begingroup\$ nrf52dk(dev-board) has usb interface and swd header. 2 case: 1-Upload code with usb (Keil is handle all things in this way). 2- esp8266 is download hex file from server, edit file and upload it to nrf. No, file doesn't include Softdevice. Thanks for advices. \$\endgroup\$ – Burak Kocaman Jan 11 at 7:29
  • \$\begingroup\$ The problem is you've provided no information about what the esp upload actually does, beyond erroneously identifying it as SWD \$\endgroup\$ – Chris Stratton Jan 11 at 9:30
  • \$\begingroup\$ I'm voting to close this question as off-topic because it has been abandoned by the asker in unanswerable form \$\endgroup\$ – Chris Stratton Feb 23 at 20:04

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.