0
\$\begingroup\$

I am conducting a feasibility study and one of the features of our innovation is that the "charge" that has been stored in our "Li-Po battery" can be transfer to another "battery storage"

I would like to know if this transferring process is possible through a cable wire connected to both Li-Po and the another battery storage. (If not, what are the ways on how to transfer this charge) I would also like to know if we are also using Li-Po battery as our second "battery storage"

Thank you in advance :)

\$\endgroup\$
  • 1
    \$\begingroup\$ How much of the stored charge are you trying to transfer? \$\endgroup\$ – Andy aka Apr 3 '19 at 11:37
  • \$\begingroup\$ Our lipo battery have 1300mAh charge capaticity. \$\endgroup\$ – Michael Apr 3 '19 at 11:43
  • 2
    \$\begingroup\$ How much of the stored charge are you trying to transfer? \$\endgroup\$ – Andy aka Apr 3 '19 at 11:52
  • 1
    \$\begingroup\$ How is this different from a power bank? \$\endgroup\$ – Hearth Apr 3 '19 at 12:01
0
\$\begingroup\$

Make a buck-boost converter that draws power from the one battery. Then make a charge circuit that can charge the other battery. Spec it so that the input of one is the same as the output of the other. Combine the two and you can transfer charge from one to the other.

You could probably make a buck-boost converter with an efficiency around 97 percent. You will also have loss in the charging circuit i'm not sure how efficient this could be.

This will in reality be a battery bank, that instead of charging your phones battery, charges another battery.

With the popper protection and isolation it will also be possible to connect them in parallel or in series. This is effectively what is done in multi-cell LiPo battery packs.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.