0
\$\begingroup\$

I am trying to flash the blink example from SDK v15 into my custom nrf52840 board, I am using pc10056 example.

I connected my ulink2 to swdio, swclck, gnd and vcc of my custom board and I can see on my debug settings but when I try to flash I get Invalid ROM Table error, I tried to change

Here are my settings

enter image description here

enter image description here

\$\endgroup\$

1 Answer 1

Reset to default
0
\$\begingroup\$

the blink example

Which one? There is one for blank MCU and one for Softdevice.

There are Options missing:

Download Options
  [x] Download to flash

Download Function
   (x) Erase Sectors

Also, the NRF52x have only one MB of flash and not two.

\$\endgroup\$
1
  • \$\begingroup\$ I am using one without Softdevice. nRF5_SDK_15.3.0_59ac345\examples\peripheral\blinky\pca10056\blank\arm5_no_packs I tried mentioned download options and erase sectors but with no luck. For the flash memory I just used the pack installed for nrf52x \$\endgroup\$
    – mohamed elsabagh
    Commented Apr 13, 2019 at 9:48

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.