This stator is out of a Wisconsin VG4D gas motor. Both black leads go to a rectifier. Red and white leads go to a regulator. White lead pigtail goes to ammeter gauge and on to battery.
I need to rewind but for the life of me I can't figure out how to connect the winding to the 4 leads coming off of the stator. I believe this is a single phase stator. This stator is wired with 3 separate wires winding around each pole alternating between left and right hand winding.
Most single phase stators just have 2 A/C leads that go to a 3 pole rectifier/regulator 2 poles for A/C power and one pole to battery.