Have you any idea how is a changeable end-of-arm tool powered when is interfaced with an ATI tool changer or something similar ? My first thought is that on both sides of parts is a F/M connectors that are precisely fitted.And if that's so, in terms of safety its allowed ?
\$\begingroup\$
\$\endgroup\$
2
-
1\$\begingroup\$ Have we any ideas? No, we have no idea what you are talking about. \$\endgroup\$– Ale..chenskiCommented May 2, 2019 at 0:51
-
\$\begingroup\$ Ok.This is a mechanism that allow a robot to change tools: youtube.com/watch?v=kDP-oofDn4w&t=114s .And in this video a deburring tool is used: youtube.com/watch?v=lfpin7OCiXg&t=35s .My question is how that electric motor used in deburring is powered ? \$\endgroup\$– Alexandru LebadaCommented May 2, 2019 at 15:16
Add a comment
|