Can someone tell me if there is a command from OpenOcd that we can deactivate/stop the Target for a while? (like when we press the reset button)
I am flashing 4 devices in a daisy-chain with Jtag and OpenOcd. After devices were flashed, it will send data to my computer and I can only check if the device is correct or not one by one. So I need to deactive 3 devices and let only one device active to be able to check, then move to the next.
Is there any command like that in OpenOcd or can you give me some suggestions?
I am really new in this field so maybe my question does not have enough infomations. Just please tell me what you need.