Currently I have a board and schematic in Eagle 7.x that are inconsistent due to a block copy. Basically, when I copied the schematic, all the net names stayed the same, but when I copied the brd, the net names incremented by 1. Now I have many errors like
Different coneections on R12 pin 1 and pad 1 (GND/GND1)
I simply am looking for a ULP that takes the net names from my schematic (GND) and renames the nets on the brd (GND1) so that they match the schematic. It seems that Eagle already knows what nets should be the same, it just doesn't know which one is right.
Any advice? I'd rather not manually rename 276 nets.