I'm confused on how to solve this warning on Altium.

Nets Element[1]: RELAY has multiple names (Net Label Relay1,Net Label Relay1,Net Label RELAY1 (Inferred),Sheet Entry R1-IN(Input))

Nets Element[1]: Relay has multiple names (Sheet Entry R1-IN(Input),Net Label RELAY1 (Inferred),Net Label Relay1,Net Label Relay1)

And so on for the whole bus. I have solved similar warnings for other single lines by using Net Ties, but that is not working for this case. Altium ends up giving an error that "The respective nets are unconnected".

There has to be a standard way of solving this issue.

enter image description here

  • \$\begingroup\$ What happens if you route the bus to the input port, instead of a wire with the same name as the bus? \$\endgroup\$
    – The Photon
    Jun 25, 2019 at 14:56
  • \$\begingroup\$ All the 8 repititions get the whole bus. Which is wrong for my design. I need to send only one Signal (RelayN - where N is repition number) to each of the repitions. \$\endgroup\$
    – Mohsin
    Jun 25, 2019 at 16:07

1 Answer 1


Here you can find how to solve your problem (Altium Website)

The problem you are describing / the error message can be corrected by ensuring that the names of all IDs are the same.

You can also ensure that you can go about your business freely, so you must do the following:

Set the report mode for this error to no report on the error reporting tab or the project options dialog box. You can find this at project -> project options

  • \$\begingroup\$ Like I said, this resolution works for single wires case. This is not a simple case. I have 8 different nets each going to 8 different copies of the same board. Its not possible to name them accordingly such that it matches. \$\endgroup\$
    – Mohsin
    Jun 25, 2019 at 13:18
  • \$\begingroup\$ If you know a way, glad to hear about it. Keep in mind this is 8 net bus going into a sheet symbol repeated 8 times. @Joost \$\endgroup\$
    – Mohsin
    Jun 25, 2019 at 13:19
  • \$\begingroup\$ Sorry, It's more complex than I thought. Maybe you can find it here. \$\endgroup\$
    – Joost
    Jun 25, 2019 at 14:07
  • \$\begingroup\$ I already have studied the resources you are mentioning. In fact that is the first thing which Google gives out. If you have any other ideas, I'll be happy to discuss. \$\endgroup\$
    – Mohsin
    Jun 25, 2019 at 16:08
  • 1
    \$\begingroup\$ @Mohsin maybe you can ask your question at the Altium Forum here. \$\endgroup\$
    – Joost
    Jun 26, 2019 at 7:02

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.