I am using XBee S2C module and configured as Zigbee coordinator with Zigbee stack profile set to Zigbee-pro and I am trying to discover and control Sengled Zigbee based smart bulb.
Using XCTU software in the network working mode when I scan I am able to see Sengled smart bulb getting discovered but I am unable to initialize it, the bulb can be identified as a remote module, however, in my case, the connection between Xbee module and Sengled bulb were like 255/? and the device status is unknown. I also tried to click the device to initial it and it returned the "could not initialize remote device". Please help with it. Many thanks.