enter image description here Hello,

I would like to draw a circuit diagram for a toroidal fluid conductivity sensor and simulate it. It follows a principle shown by the above image, the drive coil is connected to an AC source and induces a current in the sample, the current in the sample is proportional to its conductivity, this current produces a voltage across the pickup coil which can be measured and related to the conductivity of the fluid.

I am not able to figure out how to draw a circuit diagram for the sample whose conductivity is being measured. I am fairly new to analog electronics so any help would be amazing. If you need more details please let me know.

Thanks, Harid.

New contributor
Harid444 is a new contributor to this site. Take care in asking for clarification, commenting, and answering. Check out our Code of Conduct.

put on hold as too broad by Dave Tweed Sep 12 at 3:47

Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.