I have this picture. I want left, left ground, right and right ground output. Pin. But I can't understand it. Can somebody please help me. Thanks.
\$\begingroup\$
\$\endgroup\$
1
-
\$\begingroup\$ Google image search on a cropped image would have helped. \$\endgroup\$– Marcus MüllerNov 6, 2019 at 21:15
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
1
Looks like a female TRS connector: (Image from here)
So you would have left audio on the tip, right audio on the ring, and GBUF on the sleeve. (I'm assuming GBUF is the common ground for the 2 audio channels, but your schematic doesn't show it.)
-
\$\begingroup\$ Alright. It's actually not complete schematic. That was helpful though. Thanks \$\endgroup\$ Nov 6, 2019 at 17:48