0
\$\begingroup\$

Draw the circuit diagram for DC and determine the component value. The transistor must be biased with :

enter image description here

enter image description here

This is my attempt to solve this

enter image description here

The picture bellow is the way I drew the DC circuit diagram

enter image description here

I would really appreciate if I could get some feedback regarding and some help on how to find R2

\$\endgroup\$
  • \$\begingroup\$ "The transistor", would that be Q1 or Q2? \$\endgroup\$ – winny Jan 30 at 13:18
  • \$\begingroup\$ @winny , in this case it would be both because R2 is connected to both of them \$\endgroup\$ – be1995 Jan 30 at 13:22
  • \$\begingroup\$ Please name the components exactly as shown in the original question, and it's not clear what those parameters are given for which transistor. For example, probably \$U{CE-A}\$ indicates the voltage across C and E terminals of the transistor A (QA or something). Also, it seems that you have created the schematics with Circuit Lab. You don't have to put a screenshot, instead you can directly put the schematics inside the question. It allows you to modify the circuit. \$\endgroup\$ – Rohat Kılıç Jan 30 at 13:28
  • \$\begingroup\$ @Rohat Kılıç , Uce is across C and E terminals for both transistors. I tried but I need a paid membership to be able to do that \$\endgroup\$ – be1995 Jan 30 at 13:30
  • \$\begingroup\$ Please do not refer to two transistors as "the transistor". Please use component designators and refer to them. \$\endgroup\$ – winny Jan 30 at 13:41
1
\$\begingroup\$

enter image description here

Some parts of your question are a bit fuzzy. Improve that next time.

|improve this answer|||||
\$\endgroup\$
  • \$\begingroup\$ thank you. How come Re is equal to 10kohm ?. Shouldn't Re= 7.3v/4mA ? \$\endgroup\$ – be1995 Jan 30 at 16:23
  • \$\begingroup\$ that's a fuzzy part in 1st pix \$\endgroup\$ – Tony Stewart Sunnyskyguy EE75 Jan 30 at 17:05
  • \$\begingroup\$ what do you mean by fuzzy part ? I can upload a better quality picture of the circuit.. Shouldn't Re= 7.3v/4mA ? \$\endgroup\$ – be1995 Jan 30 at 17:17
  • \$\begingroup\$ There are 2 caps and Re given as 10k, it doesn't make sense to have more current =4mA in Q1 yet Re was given if I read it OK ...fuzzy \$\endgroup\$ – Tony Stewart Sunnyskyguy EE75 Jan 30 at 17:45
  • \$\begingroup\$ I see it is RL not Re so yes Re=1.8k=7.3V/4mA \$\endgroup\$ – Tony Stewart Sunnyskyguy EE75 Jan 30 at 17:54

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.