0
\$\begingroup\$

enter image description here

I can't find any examples online similar to this format, please help! Attempt: RT = (2*5)/(2+5) = 10/7 = 1.429 k-ohms VT = 8V + 8V = 16 V Do you ignore the center resistor and just add the voltages together?

\$\endgroup\$
  • \$\begingroup\$ @brhans here was my attempt: VT = 8V + 8V = 16V; RT = (2*5)/(2 + 5) = 10/7 = 1.429 k-ohms \$\endgroup\$ – jorkz Feb 4 at 20:19
  • \$\begingroup\$ refer to your course material and speak to your instructor .... you may have missed something in your previous lessons \$\endgroup\$ – jsotola Feb 4 at 20:21
  • \$\begingroup\$ Your attempt is incorrect for VT. Here's a hint on how to find that: If you took a multimeter and measured the voltage between A and B, what would your multimeter tell you? \$\endgroup\$ – KingDuken Feb 4 at 20:44
  • \$\begingroup\$ @KingDuken would it be 8 V as the other 8 V is solely channeled to the two 2 k-ohm resistors? \$\endgroup\$ – jorkz Feb 4 at 20:52
  • 1
    \$\begingroup\$ Just look at the top half for a moment...what is 'a' in relation to the upper voltage source? Hopefully you can figure it out from there. \$\endgroup\$ – evildemonic Feb 4 at 21:12
0
\$\begingroup\$

When a and b are open, the two 2K resistors in the upper circuit form a voltage divider. When a and b are short, the short current flowing back through 5K resistor. Does this help?

| improve this answer | |
\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.