Why are solderless protoboards called "breadboards"? I've used the term for decades but couldn't answer a student's question about the name.
This terminology goes waaaaay back to the days of vacuum tubes.
Generally, you would mount a number of tube-sockets on standoffs to a piece of wood (the actual "breadboard"), and do all the wiring with point-point wire and the components just hanging between the various devices.
If you needed additional connection points, you would use a solder-lug terminal strip.
The story goes that an engineer had an idea for a vacuum tube device late one night. Looking around the house, the only base for his prototype that he found was indeed his wife's breadboard, from the breadbox.
Now, I'm not endorsing actually using a real breadboard. It's your marital strife if you do.
I've actually constructed a tube project using the breadboard technique. It works very well.
Back in the day, circuits were often constructed by wire-wrapping components onto nails driven into flat pieces of wood that resembled (or were?) breadboards.
There's a nice video demo by the Make Magazine people here:
In the early days of electonics, engineers would drive nails into breadboards (literally the boards that bread is cut on) and then solder on the components.
See wikipedia's page
protected by Dave Tweed♦ Mar 26 '15 at 10:39
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?