1
\$\begingroup\$

The camera has 5 pins: 5v, D-, D+, GND and powerC.

I dont know where to plug power c in.

Can someone help me please, the camera is CNF9138_A1 By Chicony

\$\endgroup\$
1
3
\$\begingroup\$

powerC is input for 3.3V you need to get this from somewhere, you can use a voltage regulator. You can follow the steps in the link which sent by @evildemonic but nowadays thanks to arduino type boards there is a lot of option for tiny voltage regulators, you can check AMS1117 it will work. Just do not give 5V to this pin ever.

\$\endgroup\$

Not the answer you're looking for? Browse other questions tagged or ask your own question.