0
\$\begingroup\$

I am designing a 6th order multiple feedback lowpass filter with cutoff frequency at 1000 Hz. I wrote a matlab script that calculated the capacitor and restore values. I combined all transfer functions together and got a bode plot with exactly 1000 Hz for my cutoff frequency, 6th order rolloff. FYI the gain K = 1. I even checked it with an online Butterworth multiple feedback lowpass calculator and got the exact same values. Now, when I build the schematic in LTSpice, the cutoff frequency is skewered and I cannot figure out why. Either it is something about multiple feedback topology is the issue, or I am missing something in LTspice. Any solutions or explanations to why LTspice is not giving me the correct bode response? Down below is my MATLAB plot, the online filter calculator, and my LTspice schematic and bode plot.

enter image description here

enter image description here

enter image description here enter image description here

\$\endgroup\$
1
\$\begingroup\$

I just now realized that my LTSpice power supply was not correct. Guess I answered my question ¯_(ツ)_/¯

\$\endgroup\$
1
  • \$\begingroup\$ Be sure to also hit the check mark under the voting system as well so you can close the question :) \$\endgroup\$ – user103380 May 2 '20 at 4:01

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.