I've bought a T.V53.03 control board to use with an old laptop display I have at my home. After searching for the display model I found it to be an LTN133AT09 display, which uses a 1-ch 6-bit LVDS cable. The problem I have is that the control board ships with a 2-ch 6-bit LVDS cable, and I was wondering if it will work out of the box with the display.
In summary, my two questions are:
- Will the LVDS cable work out of the box with my LCD?
- Can I cut out some wires of the LVDS 2-ch cable to make it compatible? Or should I buy a 1-ch cable?