0
\$\begingroup\$

I have this old Westinghouse motor it turns clockwise and I need counter clockwise. It has 3 leads at a junction on the rear, 2 line and 1 middle lead labeled 0.

enter image description here

Anyone know how to help?
It is a 110v 3/4 hp single phase motor model 89z123a.

\$\endgroup\$
  • \$\begingroup\$ Have you looked for technical documentation on this? \$\endgroup\$ – Andy aka Jul 24 at 18:20
  • \$\begingroup\$ Could you just change the polarity of the voltage source? \$\endgroup\$ – Helena Wells Jul 24 at 18:56
  • 5
    \$\begingroup\$ @HelenaWells - changing the polarity of an AC source would have no effect. \$\endgroup\$ – brhans Jul 24 at 19:23
  • 1
    \$\begingroup\$ Can you take a better picture that clearly shows which wires are the incoming AC Mains and which wires come from inside the motor? You may have to move some wires up so that it is clear where they go. \$\endgroup\$ – Dwayne Reid Jul 24 at 19:26
  • \$\begingroup\$ @DwayneReid looks like the power cable wires have lugs crimped on the ends \$\endgroup\$ – jsotola Jul 24 at 19:45

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.