0
\$\begingroup\$

I need to control a NSF/ODE JM R1 2/2 valve. Here the datasheet (Gofile link). I cannot understand the electrical requirements. It says:

  • Power: 5W DC
  • Running power: 10 VA AC
  • Startup power: 15 VA AC

But I don't find anything about the minimum/maximum/nominal voltages. And I don't understand why there are specifications for AC and DC, and for DC there is no difference about running/startup power.

\$\endgroup\$
7
  • \$\begingroup\$ Try finding a data sheet in English. \$\endgroup\$
    – Andy aka
    Sep 29, 2020 at 8:21
  • \$\begingroup\$ @Andyaka, the product is made in Italy and I'm not aware of an English datasheet. Every time I find an English datasheet I try to read it, without asking for an Italian one :-) \$\endgroup\$
    – Mark
    Sep 29, 2020 at 8:31
  • \$\begingroup\$ I mean, if you need help to translate any section you're welcome. But I guess if there is any voltage/current specification it should be clear (at least due to measurement units) \$\endgroup\$
    – Mark
    Sep 29, 2020 at 8:33
  • \$\begingroup\$ Just think about what you are saying. How would I know what sections I might want translating if I can't read them? \$\endgroup\$
    – Andy aka
    Sep 29, 2020 at 8:34
  • 1
    \$\begingroup\$ Datasheet specifies "Bobbin type L" on page 3. Which in the full databook is presumably spec'ed elsewhere. It will be possible to order it wound for any variety of voltages and currents, providing 5W (DC. More required for AC to ride through the zero crossings). Vendor or their distributor will tell you which ones are standard/stock items even if the full catalogue doesn't. \$\endgroup\$
    – user_1818839
    Sep 29, 2020 at 12:58

0

Reset to default

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.