How can I make a (dead-time) non overlapping symmetric clock like this with digital components such as inverters and NAND gates with 7 separate phases? The first photo is doctored to show what I want with three phases. Thank you in advance

enter image description here

This is as far as I was able to get while keeping it symmetric and non overlapping, with only two phases. I need 7

enter image description here

  • 1
    \$\begingroup\$ the image would be much easier to understand if the waveforms were not overlapped \$\endgroup\$
    – jsotola
    Oct 14 '20 at 23:54
  • \$\begingroup\$ I am not sure why that matters \$\endgroup\$
    – Jirhska
    Oct 15 '20 at 0:12
  • \$\begingroup\$ it is hard to see the image on a smartphone display .... ascii art is also welcome by people that use a text only browser ... ----____---- ... the only description of what you are trying to achieve is the picture, so it should be as clear as possible \$\endgroup\$
    – jsotola
    Oct 15 '20 at 0:22
  • \$\begingroup\$ Sine plus 7 thresholds? \$\endgroup\$
    – jonk
    Oct 15 '20 at 1:02

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.