0
\$\begingroup\$

I would like to send a sensor signal (e.g. Temperature) wirelessly to a computer for a short distance (e.g.3~5 meters). The challenge is I have a very low power source (3V 50mV). I am thinking of using a

  1. Bluetooth chip: (Good quality signal, but I feel that the chips that I found online are power-draining)

  2. Antenna: with the amount of power I am delivering noise might be an issue if I am it is impossible to operate of high frequencies.

What is the best way to transmit my signal from the sensor wirelessly with as low power as possible?

\$\endgroup\$
1
  • \$\begingroup\$ "3V 50mV". Do you mean "3 V, 50 mA"? \$\endgroup\$ – Transistor Mar 11 at 21:04
1
\$\begingroup\$

My preference for sensor applications like temperature and humidity that don't need fast updates is a MICRF112/MICRF211 pair. The MICRF112 draws < 1 uA in standby and pairs nicely with just about any low power microcontroller you like. In the right setup you can get months of use from a couple AAA batteries.

\$\endgroup\$
2
  • \$\begingroup\$ I am thinking of using a thermistor for heat sensing. Do you have a better recommendation? \$\endgroup\$ – Anwar Elhadad Mar 11 at 21:22
  • \$\begingroup\$ TMP36 or the DS18B20 are my typical go-tos but every once in a while I'll go with a DHT11 to have a humidity reading as well as temp. MCP9700 isn't so bad either. \$\endgroup\$ – ScienceGeyser Mar 11 at 21:33

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.