2
\$\begingroup\$

I have a small SOT-23 (3 pins, transistor-like) device that burned out (shorted between 2 pins). I need to identify it so i can replace it.

It belongs to an Asus mainboard and after it burned down the SSD1 interface (on the left) 1 stopped working (no damage to the HDD).

The marking on it seems to be 018 ⊃

Any help would be apreciated.

The burned component

the area around it

desoldered and pin tensions

\$\endgroup\$
7
  • \$\begingroup\$ Can you remove that component and then use your multi-meter to tell us what voltage each pin has? (aka where is each pin connected. To 5V? GND?) \$\endgroup\$ Mar 15, 2021 at 0:22
  • \$\begingroup\$ @ChristianidisVasileios How would you be able to tell that? Pins don't have voltage when removed from a circuit, you can tell resistance and which may be connected together, but I'm not sure how you can identify which is GND and Supply...? \$\endgroup\$
    – Ron Beyer
    Mar 15, 2021 at 2:13
  • \$\begingroup\$ I meant the pins on the PCB, not on the component. Remove the component, and measure the voltage on the PCB. \$\endgroup\$ Mar 15, 2021 at 9:58
  • \$\begingroup\$ @ChristianidisVasileios I cannot desolder it right now I've been looking at some similar mainboard schematics and it could be a N-MOSFET 2N7002K I't a common SOT-23 around that area \$\endgroup\$
    – Angus
    Mar 18, 2021 at 14:37
  • \$\begingroup\$ It probably is either a mosfet or a BJT transistor, its base being the right pin, and the top and bottom left the source and drain \$\endgroup\$ Mar 18, 2021 at 14:40

1 Answer 1

0
\$\begingroup\$

The marking is "01B" in fact if you zoom more and the marking format is typical from Onsemi (dot below and sideways character for traceability).

Then this is probably a LP2301BLT1G / T3G from Leshan Radio Company (Onsemi and LRC are associated in China (source) ).

LP2301BLT1G datasheet

enter image description here

Picture from LCSC: enter image description here

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.