1
\$\begingroup\$

I have a transformer outputting the 240VAC 40kHz. The Transducer is 50W, 4100pF, 10-20 Ohm at resonance, ~40kHz resonance)

The Secondary of the transformer is 12mH.

I am trying to match the impedance of the output to ensure the former load is right and not overloading the switching gear on the primary side. What would be a good starting point for an L/C or R/L/C to match the impedance to the driver?

Thanks in advance!

\$\endgroup\$

0

Reset to default

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.