I have two ICs that I use them repetitively in my PCB designing. Recently, (Or Maybe I forget something), the Interactive routing doesn't start (it doesn't show the line from the pin)from some pins of my chip in Altium but it works fine when I start routing from the destination part to this pin. I need to know what my problem is.(the width and other rules seems are correct)
\$\begingroup\$
\$\endgroup\$
0
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
0
I've forgotten to set Track-to-tack clearance before start routing in rules window.
(In PCB windows)Design->Rules
ِ 