I'm in the process of installing a circuit breaker between a power supply and an HMI device, but have some uncertainty when it comes to illuminating the rocker switch.
The part number is TA35-C2F3FJ10C0. The schematic and datasheet are below:
I'm using a 24 VDC line (as per the rating of the HMI) and have the circuit breaker tripping at the correct current (1A), but can't get the LED working. There's also a small threaded screw at the bottom of the switch (see picture below) that I'm not sure of the purpose. I was thinking it may adjust the internal resistance and help drive the LED depending on the supplied voltage or is simply a GND connection. In either case, any insight would be much appreciated. Thank you.