3
\$\begingroup\$

For a home robotics project I want to fly a kite using a computer. For this to happen I need an electro motor up in the air (attached to the kite) which obviously needs a battery up there as well. From some smart people I understand that using a LiPo battery would be the best for this (because of the high energy to weight ratio). I also understand however, that a LiPo battery needs a special charger. My end goal is to charge this battery in the air by also hanging a small wind-generator under the kite so that the kite can fly indefinitely. If the battery cannot be charged while it is being used I can of course use two batteries, charging one while the other one is used.

So let's say I've got a 11.1V LiPo battery which uses about 500mA to 1A for the motor.

My question: is it possible to charge this battery from a wind generator, and if so, what hardware (preferably very low-budget) would I need for this to happen?

All tips are welcome!

[EDIT] Wow! I am overwelmed by the amount of in depth answers. I am a bit lost in them as well though, and I think I am after a bit more of a "beginners answer". As far as I understand, a wind generator supplies AC power in varying amount of Volts and Amps (right?), which needs to be converted to DC power with a constant amount of Amps (right?). So I guess that would mean I need the following order: Wind generator => Rectifier => Li-Polymer Battery Charge Management Controller (like e.g. this one) => LiPo battery pack.

Is this correct?

\$\endgroup\$
16
  • 1
    \$\begingroup\$ Electric motor in the air and attached to the kite. For my benefit, can you explain why or link me to the question that resolved this. \$\endgroup\$
    – Andy aka
    Mar 29, 2013 at 13:48
  • 1
    \$\begingroup\$ Here is the best link I could find on SE on charging LiPo:electronics.stackexchange.com/a/25405/15779 \$\endgroup\$ Mar 29, 2013 at 15:29
  • 1
    \$\begingroup\$ How much weight can your kite lift? \$\endgroup\$ Mar 29, 2013 at 17:47
  • 1
    \$\begingroup\$ "I need the following order: Wind generator => Rectifier => Li-Polymer Battery Charge Management Controller => LiPo battery pack." - That's correct. Finding an appropriate charge controller seems a little difficult because of the varying nature of the power supply, so you may want/have to come up with something 'homebrewed'. \$\endgroup\$
    – JimmyB
    Mar 29, 2013 at 18:04
  • 1
    \$\begingroup\$ Lead-acid batteries would probably make things easier - if one has some kg of lift to spare ;-) - Yet I think that LiPo isn't any more complicated to handle than those: Limit the charging current and voltage (voltage regulator + resistor for the simplest case, plus a diode maybe) and you're ready to go. Not very efficient of course, but extremely simple to build and resistant to varying supply power. \$\endgroup\$
    – JimmyB
    Mar 30, 2013 at 12:22

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.