For the green LED, I'm using a 20 kΩ resistor. I have these diagrams that suggests the green LED should be connected to VOUT- and VOUT+:
And then this diagram suggests it should be connected to TRIG/PWM and VOUT-:
Which is the right one? Should it be connected to VOUT- and VOUT+ or TRIG/PWM and VOUT-?
This is also the completed diagram that I came up with. I'm hoping it's correct.
The MOSFET board is this one: 15A 400W MOSFET Trigger Switch Drive Module PWM Regulator Control Panel
It looks like this:
The trigger source for the VOUT+ is rated at between DC 3.3 V - 20 V).
LEDs I'm using: