3
\$\begingroup\$

I am looking for assistance in editing my LTspice simulation for the design mentioned in the title. I have provided the design and output (open + short circuit) expectations (First two screenshots), as well as screenshots my own design and outputs that I observed. Please note that my design is supposed to be an exact replica of the schematic found in this link here: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8094638.

enter image description here

enter image description here

enter image description here

enter image description here

\$\endgroup\$

1 Answer 1

3
\$\begingroup\$

I believe that the 1.2us means rise and 50us is accomplished by the circuit. The problem is you need the appropriate step input.

Try editing the PWL file to have a 1us step input:

enter image description here

Edit: In the image it shows 0.1 and 0.2 for the time in the table, it should say 0.1u and 0.2u

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.