0
\$\begingroup\$

I need someone to review my schematic and guide me to fix the problems in the schematics.

  1. Need help reviewing the schematics.
  2. Can I power the ADS1299 with Seeed Xaio? If not, then how? I asked this on OpenBCI and the mentioned that I would need some filtered power supply
  3. I have modified the schematic that I have found online and that one didn't have any crystal in the schematic but most of the ADS1299 schematic feature a crystal. What is the use of it?

I have to tried to read the data sheet for ASD1299 but it was too complex for a beginner like me.

I am attaching the schematic below:

enter image description here

\$\endgroup\$
3
  • \$\begingroup\$ 2) and 3) reference products and datasheets that you don't provide. What modifications did you make to the schematic and why? \$\endgroup\$
    – LordTeddy
    Commented Oct 31, 2023 at 16:16
  • \$\begingroup\$ See Recommended Operating Conditions and read the datasheet; ti.com/lit/ds/symlink/… \$\endgroup\$
    – Fredled
    Commented Oct 31, 2023 at 16:40
  • 1
    \$\begingroup\$ Open input on CLKSEL, not a good idea. \$\endgroup\$
    – Turbo J
    Commented Oct 31, 2023 at 17:40

0

Reset to default

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.