1
\$\begingroup\$

I'm looking for makes of these 2 4-position wire-to-wire power connectors. I got them from XForce as part of their Varex valved exhaust kit, and I want to make some y-splitter pigtails. The company can't tell me where they sourced the connectors.

Male connector (the small one, ignore the big one attached to the switch) https://xforceusa.com/products/vk05/

Pics: https://imgur.com/a/OYhTBOx

I'm looking for wire-to-wire straight through connectors. So far my searching on digikey and mouser has turned up nothing that looks like it would fit.

\$\endgroup\$
1
  • \$\begingroup\$ Please embed the pictures \$\endgroup\$
    – Voltage Spike ♦
    Commented Sep 17 at 14:19

1 Answer 1

Reset to default
0
\$\begingroup\$

My Identiconn utinility identifies that as a JST HV.

  • Female plug housing: JST VHR-4N
  • Male PCB header: B4P-VH

By the way, that PCB header is being abused as a male plug. That abuse makes that connection unreliable. That particular class of connectors doesn't offer a male plug because it is only wire-to-board, not wire-to-wire. The proper way to solve the problem is to install the male PCB header on a PCB and then solder wires to the PCB.

\$\endgroup\$
2
  • 1
    \$\begingroup\$ thanks for the note on that, this is the way it comes from xforce, but I might redo some stuff. Note that this will all be interior car-mounted, and once mounted, will likely not be touched again. \$\endgroup\$
    – Lance Keltner
    Commented Sep 17 at 15:20
  • 1
    \$\begingroup\$ Thanks for how fast you found these, I'll bookmark that utility! I really appreciate it! \$\endgroup\$
    – Lance Keltner
    Commented Sep 17 at 15:21

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.