2
\$\begingroup\$

I have a laptop battery pack with a fried component (visually fried) that has the appearance of a large surface mount resistor (only 2 connectors). It has the PCB abbreviation next to it of "SR1" which I have not been able to identify. It also has "R010" and "FZ67" on it, though I haven't been able to find a component matching those part numbers either. One side of it connects directly to one end of the battery pack.

How do I identify this part?

\$\endgroup\$
  • \$\begingroup\$ Can you post an image of the relevant PCB area? \$\endgroup\$ – alexan_e Dec 13 '13 at 12:07
  • \$\begingroup\$ "SR" static relay ? \$\endgroup\$ – Blup1980 Dec 13 '13 at 12:13
  • 3
    \$\begingroup\$ The question would be easier to answer, if you add a photo of the component on the board. \$\endgroup\$ – Nick Alexeev Dec 13 '13 at 16:41
  • 1
    \$\begingroup\$ @Markus, a picture, and possibly a schematic (self drawn) would help. R010 could refer to a 0.01Ω Resistor, as a "Series Resistor" or "Shunt Resistor" for voltage and current sensing. But most resistors only have one code, not two on them. So a picture is a must here. \$\endgroup\$ – Passerby Dec 13 '13 at 16:54
  • \$\begingroup\$ Dear reader, please ignore the accepted answer and look at Dave Tweed's answer below. \$\endgroup\$ – Elliot Alderson Nov 23 '19 at 14:38
2
\$\begingroup\$

"SR" could an abbreviation of Silicon Rectifier. Its a 2 terminal component and could have the size of a smd resistor.

Its look like this:

enter image description here

Here are some examples of components: 1, 2, 3, 4

\$\endgroup\$
  • \$\begingroup\$ Sorry for the late reply. Thanks to all for your responses and help (sorry I didn't know this forum was aimed mainly at design, so I'll keep than in mind for the future, I'll also remember diagrams and/or photos). I think Butzke has hit the nail on the head, that's exactly how it looks and suits its location in circuit. Thanks for a great and detailed answer. \$\endgroup\$ – Markus Dec 15 '13 at 1:46
  • \$\begingroup\$ That being said, before getting a replacement, I'll draw the circuit to ensure it's not a resistor for voltage monitoring as previously suggested. Thanks again. \$\endgroup\$ – Markus Dec 15 '13 at 1:53
  • \$\begingroup\$ @Markus If the answer was right please consider to mark as answered. \$\endgroup\$ – Butzke Dec 17 '13 at 10:48
  • \$\begingroup\$ @Markus those packages are used for multiple types of devices. Diodes, Resistors, chip inductors, fuses, etc. \$\endgroup\$ – Passerby Dec 17 '13 at 20:16
  • 1
    \$\begingroup\$ This is almost certainly wrong. There would be no reason to connect such a diode directly to one terminal of a battery pack. \$\endgroup\$ – Dave Tweed Nov 23 '19 at 12:09
4
\$\begingroup\$

Shunt resistor, 0.010 ohms, common on laptop battery PCB.

\$\endgroup\$
  • 1
    \$\begingroup\$ Agreed - the reported component marking "R010" fits with this answer. \$\endgroup\$ – SamGibson Nov 23 '19 at 11:21
  • \$\begingroup\$ ...and this is what happens when the OP decides which answer is "best"... \$\endgroup\$ – Elliot Alderson Nov 23 '19 at 14:37

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.