0
\$\begingroup\$

I have a Canon SX210 IS which has not a connector to use a external power supply. So I wanted to connect "my" power source to the pins the battery usually touches.

In the back of my camera, it says 4.2 V but the battery has 3.7 (model NB-L5).

Right now, I have in my hands a voltage regulator (7805) and a diode which would drop 0.7 V. I plan to connect the 7805 to a car battery so there is no line noise. Do you know if it safe to feed my camera with those 4.3 V?

Should I use less voltage? Would the camera be damaged if I pass 4.2 V?

I haven't tried anything yet just for precaution.

Thanks in advance!

EDIT

Does somebody know about a voltage regultor with arround (3.8 - 4.3)V of output?

\$\endgroup\$
  • 1
    \$\begingroup\$ Any chance you could accept some answers? It looks like you've asked 4 answers but haven't accepted any. \$\endgroup\$ – RQDQ Feb 1 '11 at 18:34
2
\$\begingroup\$

The camera likely has a voltage regulator on board between the batteries and the main circuitry. If you're able to find a part number on that, you should be able to find a datasheet for the part and that will tell you what the max / min input voltages are.

EDIT: I did some googling, and it looks like there is a power adapter you can purchase:

http://www.amazon.com/Canon-ACK-DC30-Adapter-SD700IS-SD800IS/dp/B000EVLS3S

It's bloody expensive, but if you can find some specs on that power adapter, you should have a better idea of what you can supply the camera with safely.

EDIT2* I did some more searching, and it appears as though unit expects around 4.3 volts, so you should be good to go.

http://www.studio3d.com/download/canon_870_user-guide.pdf

4.3V DC 1.5A

I would think it would be easiest / most robust to just plug your power supply circuit into the DC jack.

| improve this answer | |
\$\endgroup\$
  • \$\begingroup\$ I knew about that adapter, but like you said, it's way too expensive (and I don't want to know how much more here in Argentina). I tried to google for technical specs about it, but there is a endless list of pages to sell the product and no pages showing info (not even the output voltage!). \$\endgroup\$ – Tomas Feb 1 '11 at 17:14
  • \$\begingroup\$ @Tomas - I found some specs and added a link. \$\endgroup\$ – RQDQ Feb 1 '11 at 17:37
  • \$\begingroup\$ There is no DC jack! If you see the product, they give you a fake battery body with a female plug in its back, where you can connect the plug. Because of that, I have to figure out how to connect some wires inside the camera. \$\endgroup\$ – Tomas Feb 1 '11 at 17:53
  • \$\begingroup\$ Page 32 of the manual you gave me. Anyway, that info is good and should allow me to use the 7805 voltage regulator and a diode in serial. \$\endgroup\$ – Tomas Feb 1 '11 at 17:56
  • \$\begingroup\$ @Tomas - sorry about the power jack... I saw one of the cameras had a picture of a jack and that stuck in my head. Good luck! \$\endgroup\$ – RQDQ Feb 1 '11 at 18:33

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.