2
\$\begingroup\$

A bath scale has 4 cantilever beam load cells; one at each corner. Each beam is fitted with 2 strain gauges glued to one side of the beam and three lead wires, Red, White, black, go out of the cell to the pc board (12 leads in total). Resistance r-b=1K ohm; r-w=1K ohm;w-b=2K ohm. What is(are) the Wheatstone bridge(s) and circuit for the voltage as a function of total weight?

\$\endgroup\$

closed as unclear what you're asking by Nick Alexeev, Daniel Grillo, Dave Tweed, Matt Young, Chetan Bhargava Feb 12 '14 at 15:44

Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.

  • \$\begingroup\$ Wouldn't you just do 4 bridges? One for each cell? \$\endgroup\$ – portforwardpodcast Feb 12 '14 at 9:21